Difference between revisions of "Main Page"

From Flexwiki
Jump to: navigation, search
m
 
Line 20: Line 20:
 
*Also see [[Spare Parts#Case]]
 
*Also see [[Spare Parts#Case]]
 
*setting of 3D printers
 
*setting of 3D printers
*Preheat time: 60m
+
**Preheat time: 60m
*layer thickness: 0.2mm
+
**layer thickness: 0.2mm
*infill: you can try 30%, since the material is different.
+
**infill: you can try 30%, since the material is different.
*we use PLA or ABS, you can try the others
+
**we use PLA or ABS, you can try the others
  
  

Latest revision as of 20:37, 29 July 2014

Welcome to the Flexbot Wiki

Flexbot-comparison.jpg

Find and share information about the quadcopters and hexcopters from http://flexbot.cc/

Flexbot is a completely open source nanocopter kit made by a community of makers from around the world. It's also the world's first consumer electronic product that uses 3D printing technology to achieve personalization.

Important Pages

3D printed parts


Smartphone Apps

Android app

Control App

Hardware

Flexbot PCB

Flight Control System

  • Flight control: MultiWii Copter
  • Processor: ATMega32u4
  • Gyro and Accelerator: MPU6050
  • Magnetometer: HMCL5883L
  • Barometer: BMP085
  • BLE IC: CC2541 or CC2540
  • Onboard 5V Regulator
  • Onboard 3.3V Regulator
  • Power Input: 3.3~4.7V
  • Flight Time: about 7 minutes
  • Communication protocol: BLE 4.0

More info